Miele coffee maker fault

Fault 73 miele coffee maker

This error code appears when the ejection slide cannot be pulled back into the brew unit. This problem will prevent you from removing and emptying the waste bin. Most likely, it happens when grounds and debris get in places where the brew unit and/or waste bin should move. As a result, the two elements fail to line up and the grounds stay in there instead of getting out of the machine.

To unblock it, open the door and lift off the drawer in the upper left part. Reach the waste bin and brew unit, move them a little, then try to restart the machine. Try again if it does not work: not unlikely, it will take a few attempts. When it finally works, remove the brew unit and waste bin and rinse them. When reassembling the machine, make sure they sit as they are designed to.

Fault 10 miele coffee maker

The F10 error code indicates that the unit is not receiving water. Check that your coffee maker is connected to the plumbing system. If it is, and water supply is not turned off, it is likely that the tank is misplaced or not connected properly. Reinsert it.

Second, there may be not enough water in the tank after descaling. Refill it correctly. Once you have corrected these issues, the machine should start working properly. However, if the message appears again, there has to be a more serious problem. Please contact a professional technician.

Fault 81 miele coffee maker

When the F81 code occurs, you have a problem in the steam heater or fuse. There is a simple solution for those who do not use the steam mode: disabling the function in the setup meny.